Waxman leakSMART hub3.0, Manual

Page: 10 / 22

leakSMART hub3.0
April 02, 2018 Copyright © 2018 Waxman
Page | 10
Flash 8MB
Operation Buttons 1x User input (Wi-Fi Provisioning)
1x Factory reset
1x Power On/Off
Status Indicator 1x RGB LED
Operating System FreeRTOS
Certification: FCC, IC
Operating
Temperature
0C to 45C
Storage Temperature -20C to 45C (Driven by battery specifications)
Operating Humidity
10%~90%RH (Non-condensing)
Storage Humidity 10%~90%RH (Non-condensing)
Enclosure
Dimensions (in mm)
92 x 35 x 90 mm(L x W x H)
Weight (in g) 90gram
Table 4 - leakSMART hub3.0 specifications
Note: The Primary source of power is Adapter and battery is only used for backup when primary
source is not present.
3.4 Protocol & Security Support
The Hub3.0 contains a full-featured wireless software stack:

AP and Station Mode for Wi-Fi

ZigBee
 WPA/WPA2 Personal
3.5 Wi-Fi Addresses and Port Numbers
3.5.1 Hardware Address
The hardware address of Wi-Fi is also referred to as the physical address, or MAC address. Sample ways
hardware address may be represented:

00-80-A3-14-1B-18

00:80:A3:14:1B:18
3.5.2 Port Numbers
Every TCP connection is defined by a destination and source IP Address, and a destination and source
port number. For example, a Telnet server commonly uses TCP port number 23.
The following is a list of the default server port numbers running on the leakSMART hub3.0:

TCP Port 443 : HTTPS (Web Manager Configuration)
 TCP Port 80 : HTTP (Web Manager Configuration)
3.6 leakSMART hub3.0 information Label
The leakSMART hub3.0 information Label on the device contains the following information about the
specific unit: