WBSn-2450 User Guide
Page - 30 -
4.1.2
Users
In the Users section, you can manage which users are allowed to access the system, and allocate specific
permissions per user, according to their definition in the system.
To add a user
1.
Navigate to Administration => Users.
2.
Click Add. The following dialog is displayed.
3.
Specify the parameters, as described in the following table, and click Apply.
Parameter
Description and Values
Username
Name of the user.
Permission
Specify the permission assigned to a particular user. Values:
•
Viewer
•
Administrator
•
Technician
Password
Specify a password for the user.
Confirm Password
Confirmation of the user password.
Note: To edit an already existing user, highlight the user row in the screen, and click Edit.
4.1.3
Firmware
The firmware section enables you to upgrade your system firmware, or to rollback to a previously saved
version. Upgrading can be performed using either via HTTP or FTP servers, according to your
requirements. For information about configuring the FTP server address and password, see
Note: It is strongly recommended that upgrades be performed at a time when the system is not fully
utilized (e.g. during late-night hours, when traffic is low).
