WBSn-2450 User Guide
Page - 21 -
To specify the Base Station Unit Location
1.
Navigate to Configuration => System =>Location in order to specify the geophysical direction
of the transmission from the Base Station.
2.
Specify the values of the fields, using the table below.
Parameter
Description
Location
Specify the geographical location (country) of the base station.
Longitude
Specify the longitude of the base station location.
Latitude
Specify the latitude of the base station location.
Azimuth
Specify the direction to which the base station is directed.
Management VLAN
The management VLAN enables administrators to manage the WBSn-2450 over a separate VLAN (that
can be linked to a secured SSID). This VLAN can be selected from the enabled VLAN list, and, to which is
assigned additional security properties and settings than other available VLANs.
Note: Only one VLAN can be defined as the Management VLAN in the WBSn-2450 system.
Prior to specifying the management VLAN, you must have at least one VLAN defined. See
3.3 Wireless Interface -- Setting up WLANs
3.3.1
Virtual AP (VAP)
In this section, you can define and set-up a Virtual AP (VAP), as well as viewing the status of any VAPs
that were previously defined.
To define a VAP:
1.
Navigate to Configuration => Wireless => VAP.
2.
Specify the parameters according to the parameter value definitions in the below table.
Parameter
Description
Name
Name of the VAP
Permitted length: 1-32 alphanumeric characters (all alphanumeric characters
are allowed, with spaces, dashes, or underscores)
Hidden
Indicates whether these SSID parameters are broadcast to the public, or
hidden, only accessible by authorized users.
