[24]
PAGER GROUPS
The
PAGER GROUPS
tab (
fig. 18
) shows all of the current pager IDs bound together by a common group ID.
Figure 18: Pager Groups Tab
1.
GROUP ACTIVE
– Controls if the group is checked when paging data is received from a Host Device.
2.
GROUP ID
– The ID that triggers a group page.
It must be an ID not used in any Pager Family.
3.
PAGER ID
S
– A list of up to 15 Pager IDs in the paging group.
It must be an ID in a Pager Family.
4.
TIMER ACTIVE
– Sends a page
every 2 min.
to its group unless a host device sends a reset command.