62
values. Blacklist tells the system to NOT output messages associated with the list of Pager ID values,
while whitelist tells the system to output messages associated with the list of Pager ID values.
An example blacklist setting is blacklist=101;105. An example whitelist setting is
whitelist=102;103;104;200.
Default Msg
The message value that will display when there are no active events or active priority messages to be
displayed. If the individual LED Display Default Msg is defined, it will take precedence over the system
level LED Display Default Msg.
Schedule
The Alert Processing Schedule assigned to the LED display. If no schedule is assigned, the LED display will
be used continuously.
Delete
Allows you to delete this record.
Digital Alert Viewers
The Digital Alert Viewers Configuration page allows the configuration of Digital Alert Viewers.
Figure 33 - Digital Alert Viewers Configuration
