Chapter 7: Configuring Lanes
•
61
Removing a road
1
To remove an entire road, including all lanes, click
Construct
Roads
.
2
Click on a road to remove it.
Adding a barrier
1
Click
Construct Barriers
.
2
Click in paved (black) areas to add a barrier.
Removing a barrier
1
Click
Remove Barriers
.
2
Click on an existing barrier to remove it.
Reversing lane direction
Before
After
Figure 54.
Reversing the direction of the center lane
1
Click
Reverse Direction
.
2
Click on a lane to reverse its direction.
3
Repeat step 2 until all lanes reflect the actual direction traveled
by detected vehicles.
Definition.
Constructing a
barrier or median is
essentially the act of
dividing a single road
into two separate
roads. SmartSensor
Manager defines a
barrier or median
as two adjacent
shoulder lines or two
shoulder lines with
only background
(khaki-colored) areas
in between them.
Note.
Using the
Reverse Direction
button only affects
the SmartSensor
Manager display,
not the sensor or
any detections.
