Wavetronix Click 500 Series, User Manual

Page: 89 / 109

88
CHAPTER 8
• CLICK 513
Note
Values in Click Supervisor will be displayed according to the units (English or metric)
selected in SSMHD.
Figure 8.11 – Approaches Tab
Setting Description
Over Speed
If enabled, will qualify* an interval if the average speed is above the
set threshold
Under Speed
If enabled, will qualify* an interval if the average speed is below the
set threshold
Over Volume
If enabled, will qualify* an interval if the total volume is above the set
threshold
Under Volume
If enabled, will qualify* an interval if the total volume is below the set
threshold
Over Occupancy
If enabled, will qualify* an interval if the percentage of occupancy is
above the set threshold
Under Occupancy
If enabled, will qualify* an interval if the percentage of occupancy is
below the set threshold
Table 8.6 – Approaches Tab *When AND logic is used, intervals do not
qualify until ALL enabled criteria are met.
The 513 > Lanes tab allows you to set the threshold values for the interval data (see Figure
10.?? and Table 10.??).