Wavetek ANT-20, Operating Manual

Page: 53 / 126

ANT-20/ANT-20E Broadband Analyzer/Generator
Operation O-35
5.9.3 Called party address
This field is used to display and set the ATM address of the called party (in “Calling” mode).
5.9.4 Own instrument address
This field is used to display the instrument's own ATM address as set in the instrument
configuration. This address is used as the call address in self-call mode.
The display fields have the following meanings:
Section Meaning
Called Party Address Address display and action button for changing the called address.
Format Format type display (e.g. Native E.164)
Address Address display (various formats)
Subaddress Sub-address display (if required)
Change Address Change address
•
for “Native E.164” format (Sec. 4.5.1, Page O-21)
•
for “NSAP” format (Sec. 4.5.2, Page O-22)
Table O-18 “Called party address” dialog sections
Section Meaning
Own instrument Address Own instrument Address
Format Format type display (e.g. Native E.164)
Address Address display (various formats)
Sub-address Sub-address display (if needed)
Table O-19 “Own instrument address” dialog sections