background image

PDF Cover Page

Engineering and Intuition Serving the Soul of Music

Perkins Electro-Acoustic Research Lab, Inc.

86008, 2106 33

 Ave. SW, Calgary, 

AB;  CAN T2T 1Z6

Ph: +.1.403.244.4434    Fx: +.1.403.245.4456

Web:   

http: // www. pearl - hifi . com

 

E-mail:  

 

custserv @ pearl - hifi . com 

Inc.

Please note that the links in the P

EARL

logotype above are “live”

and can be used to direct your web browser to our site or to

open an e-mail message window addressed to ourselves.

To view our item listings on eBay

click here.

To see the feedback we have left for our customers, 

click here.

This document has been prepared as a public service . Any and all trademarks 

and logotypes used herein are the property of their owners.

It is our intent to provide this document in accordance with the stipulations with

respect to “fair use” as delineated in Copyrights - Chapter 1: Subject Matter and 

Scope of Copyright; Sec. 107. Limitations on exclusive rights: Fair Use.

Public access to copy of this document is provided on the website of Cornell Law School

at  

http://www4.law.cornell.edu/uscode/17/107.html

and is here reproduced below:

Sec. 107. - Limitations on exclusive rights: Fair Use 

Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, includ-

ing such use by reproduction in copies or phono records or by any other means specified by that section,
for purposes such as criticism, comment, news reporting, teaching (including multiple copies for class-
room use), scholarship, or research, is not an infringement of copyright. In determining whether the use
made of a work in any particular case is a fair use the factors to be considered shall include:

1 - the purpose and character of the use, including whether such use is of a 

commercial nature or is for nonprofit educational purposes; 

2 - the nature of the copyrighted work; 

3 - the amount and substantiality of the portion used in relation to the copy-

righted work as a whole; and 

4 - the effect of the use upon the potential market for or value of the copy-

righted work. 

The fact that a work is unpublished shall not itself bar a finding of fair use if such finding is made

upon consideration of all the above factors

Summary of Contents for 182A







































Reviews: