WIFI-LPT100-B User Manual
31
/
60
5.1.6 AP Setting Page
When user select module works at AP and AP+STA mode, then need setting this
page and provide wireless and network parameters. Most of the system support DHCP to
achieve IP address, so we suggest to “Enable” DHCP server in most applications.
5.1.7 Other Setting Page
WIFI-LPT100-B usually works at transparent mode. At this mode, the user device
which connected with WIFI-LPT100/WIFI-LPB100 will connect and communicate with remote
PC or server. At this page, user need setting serial port communication parameters and
defines TCP related protocol parameters.
Figure 25 SSID Scanning Page
Figure 26 AP Setting Page