RS485 TO ETH ( B)
Figure 8 Device parameters
In this interface, the user can set the parameters of the device, and then click "Modify
Setting" , the parameters will be set to the flash of the device, and they will not be lost after
power failure. At the same time, the device will automatically restart.
The main configuration parameters here are: baud rate, data bit, parity bit in serial port
settings; IP address, subnet mask, gateway in network settings; sometimes according to
computer software, you also need to configure the work of the serial server model.
The detailed meanings of other parameters are as follows:
Table 4 Parameter meaning
parameter name Ranges
meaning
Virtual serial
port Unused, created
virtual serial port
You can bind the current device with a created
virtual serial port. Please add a COM port in the
"Serial Port Management" on the main interface
first.
Device model
Only display the model of the core module
Device name
Any
You can give the device an easy-to-read name, up
to 9 characters long
Device ID
Factory unique ID, cannot be modified.
Firmware
version
The firmware version of the core module
Supported
Refer to Table 5 Supported functions of the
13
/
52
