SIM7600CE-T/E-H/A-H/G-H 4G Modules
Introduction
4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600E-H
Overview:
This is a 4G/3G/2G communication and GNSS positioning module designed for Jetson Nano, it
supports global LTE CAT4 up to 150Mbps for downlink data transfer, with pretty low power
consumption.
Just attach it onto the Jetson Nano Developer Kit, easily enable functions like 4G high speed
connection, wireless communication, remote video monitoring, making telephone call, sending
SMS, global positioning, and so on.
Features:
1. 40PIN GPIO extension header for connecting Jetson Nano
2. Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
3. Supports GPS, BeiDou, Glonass, LBS base station positioning
4. Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
5. Breakout UART control pins, to connect with host boards like Arduino/STM32
6. SIM card slot, supports 1.8V/3V SIM card
7. Onboard 3.5mm audio jack with earphone and mic support, for making telephone call
8. 2x LED indicators, easy to monitor the working status
9. Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
10. Baudrate: 300bps ~ 4Mbps (default: 115200bps)
11. Autobauding baudrate: 9600bps ~ 115200bps
12. Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
13. Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
14. Comes with development resources and manual (examples for Jetson Nano/Raspberry
Pi/Arduino/STM32)
Communications Specifications:
LTE
WCDMA
/
TD-SCDMA /
CDMA 2000
EDGE
GSM/GPRS
Band
LTE-TDD
UMTS/HSDPA/HSPA+ B1/B2/B4/B5/B6/B8/B19
GSM/GPRS/EDGE
