17 / 69
SUCCESSFUL DECODING TONE DURATION SETTING
Scan the following barcode to modify the tone duration of the device after successful decoding.
The default is normal.
SETTING BEEP FREQUENCY FOR DECODING FAILURE
Scan the following barcode to modify the frequency of the device beeping after decoding failure.
The default is Razz.
READ DELAY
Scan the following barcodes to set the time interval between the device reading one barcode and
then reading the next barcode. Default = 750ms.
*Normal Beep
Short Beep
*Razz (250Hz)
Medium (3250Hz)
High (4200Hz)
No Delay
*Short Delay (750ms)
Medium Delay (1000ms)
Long Delay (1500ms)
