IONIC 16 / User Guide
12
M
ANUAL
D
EVICE
C
ONFIGURATION
You can assign, remove, and manage a device manually. Click on
the
arrow
symbol in a device slot (circled here in yellow) to open
the
Device
Menu
, then select an IONIC 16 from the Network
Devices submenu. If more than one IONIC 16 is connected to the
SoundGrid network, each will appear in the Device Menu. Any
device that is not already in use will be available for assignment
(‘Free”).
If no other devices are assigned, the current device will
become your clock master.
The local computer can be assigned from the Network Device menu. Drivers and servers are assigned in the same
manner. See the LV1 user guide for specific instructions about device assignment, I/O channel patching, and clock.
Status Indicators
The LED on the front panel of IONIC 16 indicates network status.
Blinking Red
Device is ON, but not connected to a system (host).
Blue
Device is connected to a system.
Yellow
Device needs a firmware update.
Multi-color
ID light that is triggered by the panel that is controlling the device. This identifies the hardware.
Red/White bursts
The device is not connected to the SG Network and is running on external power.
Blue/White bursts
The device is connected to the SG Network and is running on external power.
LEDs on the rear panel show the speed/standard of the Ethernet connection.
One LED
100 MBS
Two LEDs
1 GB
Summary of Contents for IONIC 16
Page 1: ......
