- 69 -
HS-107146.2 / HS-107146.3 EN
PARTS IDENTIFICATION
1.
Ceramic heating plates
2.
Power indicator light
3.
On/off switch
4.
Plate lock switch
5.
Handle
INSTRUCTIONS FOR USE
Before use:
⚫
Remove the appliance protective form.
Use:
⚫
Unroll the cable completely before plugging it.
⚫
Connect the appliance to the mains.
⚫
Release the plate lock switch.
⚫
Open the straightener and slide the
on/off switch to position “ON”.
The indicator light illuminates and the
appliance begins to heat up.
⚫
Place the hair between the plates perpendicularly. Close the plates by pressing firmly on the handle,
maintain the pressure and pull smoothly from the root to the tip. Pass the iron over the hair slowly.
⚫
If necessary repeat this process until the desired result is achieved.
⚫
Proceed gradually with the rest of the hair.
⚫
To give more shape to your hair, follow the same operation as described previously, but this time turn the
straightener inwards. If you would like to create an informal look, turn the straightener outwards so that
the tips of your hair face outwards.
Once you have finished using the appliance:
⚫
Slide the
on/off switch to position “OFF”.
Unplug the appliance from the mains.
CLEANING
⚫
Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
⚫
Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
⚫
Do not use solvents, or products with acid or base pH such as bleach, or abrasive products, to clean the
appliance.
⚫
Do not submerge the appliance in water or any other liquid, or place it under a running tap.
TECHNICAL DATA
Operating voltage: 100-240V ~ 50-60Hz
Power consumption: 32W
Summary of Contents for HS-107146.2
Page 1: ......
