Waves HPSA-7100-R Series, Installation And User Manual

Page: 172 / 179

146 HPSA-7100-R Series Installation and User Manual
P/N P01- 04946 Rev C
D.3 AMB SETTINGS
The configuration of SW1 on the AMB is the same for both the 70.7 V
RMS
and the 100 V
RMS
inputs. For
both the 70.7 V
RMS
and the 100 V
RMS
external Audio In, configure the AMB for 1V
RMS
operation.
FIGURE D.4 AMB SW1 - Set to the 1V Position for 70.7/100 V
RMS
Audio Inputs
D.4 HPSA UNIT VOLUME SETTINGS
Refer to the Section 7.2, “Setting the Volume Controls” when configuring the Unit Volume Settings for
the 70.7 V
RMS
and 100 V
RMS
Audio Inputs listed below in Table D.3.
TABLE D.3
100 V
RMS
Unit Volume Settings
Rated Input
Voltage
Master
Volume
1,2
Line-In
(Nominal)
Line-In
Allowed Range
3,4
AMB Output
Voltage
5
(rated load)
70.7 V
RMS
982 406 386 - 461
33 V
RMS
- 34 V
RMS
100 V
RMS
982 408 388 - 458
33 V
RMS
- 34 V
RMS