Waves HPSA-7100-R Series, Installation And User Manual

Page: 120 / 179

Using the HPSA-7100-R
94 HPSA-7100-R Series Installation and User Manual
P/N P01- 04946 Rev C
8.2 GATHERING HPSA-7100-R INFORMATION
The sections below describe functions that can be performed on-site from the
communication panels.
8.2.1 Running a Silent Test on the Amplifiers
For instructions on running a silent test on the amplifiers, refer to Section 7.3.2, Run a
Silent Test on Amplifiers.
8.2.2 Checking HPSA-7100-R Status
The Control Panel provides the ability to query several HPSA-7100-R status items for
routine maintenance or troubleshooting.
8.2.2.1 Unit Status
1. From the HPSA-7100-R Control Panel, press the down arrow, select Get HPSA
Status and then press ENTER . A sub-menu appears on the screen.
2. Select Unit Status and press ENTER . The screen displays a list of unit functions
and their statuses.
FIGURE 8.5
Unit Status screen on Control Panel

AC Main Power - Reports the status of mains power as Good or Bad.

Solar Power - (future option)

Unit Trouble - Reports overall system health as Good or Bad.

HPSA Door - Reports electronics door as Open or Shut.

Cell Flood - (future option)

Battery Status - Reports PDB battery charger operations as Good or Bad.

HPSA Busy - Reports Yes or No as to whether the unit is running internal
processes.

Battery Voltage - Reports the battery voltage for the four connected lead-
acid batteries.
3. When finished, do one of the following:

Press Back to return to the sub-menu.
OR

Press CANCEL to return to the main menu.