TIDAL WAVE
QUICK START
GUIDE
4828 NE 12th Avenue, Oakland Park, Florida 33334-4804 • 1.954.928.1310 • [email protected]
Page 1
How to Configure/Operate
1. Plug one end of the ethernet cable provided into the ethernet port of the unit.
2. Plug the other end of the ethernet cable into the PoE (Power Over Ethernet) injector.
3. Plug the power supply into the PoE injector (Both lights on the PoE should show solid green).
4. Plug the PoE injector into the ethernet port of a laptop, computer or router.
TIP: When plugging into a router it will be the Internet (WAN) port.
Connecting to Internet via physical connection
1. Open a web browser and type in 192.168.89.1 in the URL bar at the top.
2. From the network scan page, connect to a network that you are familiar with.
3. The connection should read, “(Three dots)..., Checking IP, Got Internet”.
Cellular
Antenna
1 Gig PoE
Ethernet Port
2.4GHz
Antenna
5GHz
Antenna
Po
w
er
Po
w
er
M
ain
Dir
ect ether
net c
onnec
tion
Wi-Fi Antennas must be
mounted 15 - 25ft off the
waterline.
Cat5 Ethernet Cable
Se
c.
Data
Data
Data
Ports 2, 3, and 4 are WAN ports.
Ports 1 and 5 are LAN ports.
Da
ta
Cat5 Ethernet Cable
Ca
t5 E
ther
net C
able
Cat5 Ethernet Cable
Insert SIM Card with
Notch
in first and
Contacts
faced up toward blue light.
Contact
Data Only
Non-E911 SIM
Notch
x2 Dual Band Antennas
PoE Injector
x2 Spare N Connector
x2 Wifi Antenna
Cat5e Ethernet Cable
Cell Antenna Kit
x2 Low Loss 400 Cable
12V Power Supply
Cellular Antenna
Accessories
