WAVE EXCITE CLASS & TREND, Service Maintenance Manual

Page: 209 / 214

CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Page 11.3
11.3. TWICE-YEARLY MAINTENANCE OPERATIONS
These operations can only be carried out by a qualified technician specifically trained by
Technogym and authorized to carry out machine installation and adjustments, as well as
special maintenance operations or repairs which require special knowledge of the
machine, its operation, safety systems and working procedures.
The twice-yearly maintenance operations involve checking the functioning, wear and tension of the
mechanical components so as to ensure the correct and safe operation of the machine.
For the twice-yearly maintenance of the machine, proceed as follows:
11.3.1. C
ARRYING OUT THE MONTHLY MAINTENANCE PROCEDURE
1. Carry out the procedure described in paragraph 11.2. “Monthly maintenance operations”.
11.3.2. S
ETTING UP THE OPERATION
1. Turn off the machine by placing the switch in position 0 (OFF).
2. Unplug the mains lead from the wall outlet.
11.3.3. C
HECKING THE WORKING CONDITIONS
1. Using a multimeter, check that the machine earth node is correctly connected to earth.
11.3.4. C
HECKING THE WEAR OF RUBBER PARTS
1. Check the state of wear of the rubber components. Replace if there are evident signs of wear.
11.3.5. C
HECKING THE BELTS
1. Check the state of wear of the belts, using the pulley to turn it by hand, paying special attention
to the edges and the inner part. Replace if there are evident signs of wear.
2. Also check the tension of the belts.
11.3.6. C
HECKING THE PLAY OF THE LEVER AND PEDAL GROUP
1. Choose a manual training session with difficulty level 1. Step onto the pedals and start using the
machine, moving the weight of your body backward and forward, to the right and left. Check
whether the lever and pedal group follows these shifts in body weight with an excessive amount
of play. If this is the case, replace the lever or pedal group.
11.3.7. C
HECKING THE DISPLAY
1. Check the operation of all the keys on the keyboard.
2. Check the operation of all the LEDs and the buzzer.