WAVE EXCITE CLASS & TREND, Service Maintenance Manual

Page: 157 / 214

CARDIO WAVE EXCITE Class & Trend: Service & maintenance manual- rev.2.0
Page 9.5
9.1.10. D
EFAULT DISTANCE
It is possible to set the default distance for an exercise session, with values ranging from 1 to 999.
To change the setting, when the display shows the current value:
DEFAULT DISTANCE KM xxx
Press the
ENTER
key to modify the value: The current parameter value starts to blink on the
display; use the
↑
and
↓
keys to increase or decrease the value, or use the
+/- GOAL
keys to scroll
through and modify the individual digits.
Press
ENTER
to confirm the operation, use the
+
or
–
effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 10.
9.1.11. E
NABLE
TGS
It is possible to enable or disable the use of the TGS reader. To change the selection, when the
display shows the current setting:
TGS : xxx
Press the
+/- GOAL
keys to select the desired option out of those listed in the table below:
TGS
ENABLED
<default>
DISABLED
Press
ENTER
to confirm the operation, use the
+
or – effort level keys to move to the next or
preceding parameter.
9.1.12. E
NABLE KEYBOARD
It is possible to disable the keyboard so that the machine can only be used with the TGS. To change
the selection, when the display shows the current setting:
KEYS : xxx
Press the
+/- GOAL
keys to select the desired option out of those listed in the table below:
K
EYS
ENABLED
<default>
DISABLED
Press
ENTER
to confirm the operation, use the
+
or – effort level keys to move to the next or
preceding parameter.