manualshive.com logo in svg

wattstopper EW-200-120, Installation Instructions Manual

Share
Download
wattstopper EW-200-120 Installation Instructions Manual Download Page 1

SPECIFICATIONS

Voltage:

 

EW-200-120, EW-205-120 ............................................. 120VAC, 60Hz

 

EW-200-277, EW-205-277 ............................................. 277VAC, 60Hz

Mountable Locations  ......................................Wall, ceiling or under eaves

Operating Temperature...................................-40° to 130°F (-40° to 55°C)

Lens Coverage: .................................................................................... 270°

Load Ratings ................................. 0–1000W ballast or tungsten @120VAC

 

 ...................................................................0–1000W ballast @277VAC  

Motor Load:  ........................................................................1/6 HP @20VAC

 

 ...................................................................................1/3 HP @277VAC

Current Consumption

 

Without Isolated Relay.......................................................22 mA max.

 

With Isolated Relay  ...........................................................34 mA max.

Time Delay Adjustment . . . . . .............................................. 12sec.–16min.

Light Level Adjustment .......................................................... 0.5FC–200FC

Isolated Relay on EW-200 (both -120 & -277 models)

 

Normally Open & Normally Closed contacts.

Isolated Relay Rating: .........................................................1A @ 30VAC/DC

UL 773A Raintight Rated

IEC-IP-55 Rated

Ins
tallation Ins

tructions

U.S.Patents: 4,787,722; 5,640,113

EW-200 & EW-205

 Outdoor  PIR Motion Sensors

Santa Clara, CA 95050

800.879.8585

Model#s: 

EW-200-120  

EW-200-277

EW-205-120  

EW-205-277

Summary of Contents for EW-200-120













Reviews:

No comments

Brands by name

Popular brands

Load more brands