● Verify that the LED ETH1 or ETH2 lights up.
● Register the IP address of the Box on the IP-852 server of the LON network.
To configure each of the different equipment:
● Write down the Neuron-ID, brand, model of the equipment, and any identifying
information. This information will be necessary for the installation configuration and
to retrieve data.
● If you have the NL220 software, export the LON database as an archive file or as a
NLC file.
The equipment communicates in LPB
To connect one or several equipement:
● Connect the LPB Bus to the X-Bus port of the Box.
● For each device, connect its MB cable to the X-Bus (-) port and its DB cable to the
X-Bus (+) port on the Box.
30
2022-05 V1.4
