Installation and Operation Manual
SunTouch
®
ConnectPlus™
Smart Sensor
Description
The ConnectPlus™ Smart Sensor is a temperature and water leak-
age sensor that pairs to the ConnectPlus thermostat. This device
can be used as an optional floor temperature sensor for the radiant
floor heating system. Detected water leaks produce audible and
visual alarms, and notifications are transmitted to the thermostat.
Where to Use
Temperature Sensor
Place the Smart Sensor directly on a heated section of the floor to
use as a floor control sensor.
Water Leakage Sensor
Place the Smart Sensor directly on the floor where there is a risk
of water leakage (near water lines, washing machines, hot water
tanks, ...) within range of the ConnectPlus thermostat.
Specifications
• Power: 2 x AA batteries included
• Battery Life : 1 year
• Range: 75 ft, line-of-sight
• Pairing limit: 6 devices
• Operating Temperature range : 32°F to 104°F (0°C to 40°C)
• Operating Humidity range : 0 to 100% humidity
• Storage temperature range : -4°F to 122°F (-20°C to 50°C)
• IP Waterproof Class : IP67
• Diameter 3
3
⁄
8
" (85mm), Height 1
11
⁄
16
" (43mm)
WARNING
!
Please read carefully before proceeding with
installation. Your failure to follow any attached
instructions or operating parameters may lead to
the product’s failure.
Keep this Manual for future reference.
