RP-IS-LF919-FS
Installation, Maintenance, and Repair Manual
Series LF919-FS
Reduced Pressure Zone Assembly
1
⁄
2
" – 2"
WARNING
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information
can result in death, serious personal injury, property
damage, or damage to the equipment.
Keep this Manual for future reference.
Need for Periodic Inspection/Maintenance:
This prod-
uct must be tested periodically in compliance with local
codes, but at least once per year or more as service condi-
tions warrant. All products must be retested once mainte-
nance has been performed. Corrosive water conditions and/
or unauthorized adjustments or repair could render the prod-
uct ineffective for the service intended. Regular checking and
cleaning of the product’s internal and external components
helps assure maximum life and proper product function.
WARNING
!
Local building or plumbing codes may require modifications
to the information provided. You are required to consult the
local building and plumbing codes prior to installation. If
the information provided here is not consistent with local
building or plumbing codes, the local codes should be
followed. This product must be installed by a licensed
contractor in accordance with local codes and ordinances.
WARNING
!
NOTICE
For Australia and New Zealand, line strainers should be
installed between the upstream shutoff valve and the inlet of
the backflow preventer.
If installed on a fire sprinkler system, all mechanical checks,
such as alarm checks and backflow preventers, should be flow
tested and inspected internally in accordance with NFPA 13
and NFPA 25.
Testing
For field testing procedure, refer to Watts installation sheets
IS-TK-DL, IS-TK-7, IS-TK-9A, IS-TK-99D, and IS-TK-99E at
www.watts.com.
For other repair kits and service parts, refer to the Backflow
Prevention Products Repair Kits & Service Parts price list
PL-RP-BPD at www.watts.com.
For technical assistance contact your local Watts representative.
LF919-QT-FS
Series LF919-FS is equipped with an integrated flood sensor that,
when activated, triggers notification of potential flood events from
excessive relief valve discharges.
NOTICE
An add-on connection kit is required to activate the integrated
flood sensor. Without the connection kit, the flood sensor is a
passive component that has no communication with any other
device. (A retrofit sensor connection kit is also available for exist-
ing installations. See “Add-on and Retrofit Sensor Connection
Kits,” for ordering details.)
NOTICE
Use of the integrated flood sensor does not replicate the need
to comply with all required instructions, codes, and regulations
related to installation, operation, and maintenance of this product,
including the need to provide proper drainage in the event of a
discharge.
Watts
®
is not responsible for the failure of alerts due to connectiv-
ity or power issues.
NOTICE
The information contained herein is not intended to replace the
full product installation and safety information available or the
experience of a trained product installer. You are required to
thoroughly read all installation instructions and product safety
information before beginning the installation of this product.
Inquire with governing authorities for local installation requirements.
DRAFT
Need for Periodic Inspection/Maintenance:
Need for Periodic Inspection/Maintenance:
This prod-
This prod-
uct must be tested periodically in compliance with local
uct must be tested periodically in compliance with local
codes, but at least once per year or more as service condi-
codes, but at least once per year or more as service condi-
tions warrant. All products must be retested once mainte-
tions warrant. All products must be retested once mainte-
nance has been performed. Corrosive water conditions and/
nance has been performed. Corrosive water conditions and/
or unauthorized adjustments or repair could render the prod-
or unauthorized adjustments or repair could render the prod-
uct ineffective for the service intended. Regular checking and
uct ineffective for the service intended. Regular checking and
cleaning of the product’s internal and external components
cleaning of the product’s internal and external components
helps assure maximum life and proper product function.
helps assure maximum life and proper product function.
DRAFT
DRAFT
DRAFT
Local building or plumbing codes may require modifications
Local building or plumbing codes may require modifications
to the information provided. You are required to consult the
to the information provided. You are required to consult the
local building and plumbing codes prior to installation. If
local building and plumbing codes prior to installation. If
the information provided here is not consistent with local
the information provided here is not consistent with local
building or plumbing codes, the local codes should be
building or plumbing codes, the local codes should be
followed. This product must be installed by a licensed
followed. This product must be installed by a licensed
contractor in accordance with local codes and ordinances.
contractor in accordance with local codes and ordinances.
DRAFT
DRAFT
For Australia and New Zealand, line strainers should be
For Australia and New Zealand, line strainers should be
installed between the upstream shutoff valve and the inlet of
installed between the upstream shutoff valve and the inlet of
the backflow preventer.
the backflow preventer.
If installed on a fire sprinkler system, all mechanical checks,
If installed on a fire sprinkler system, all mechanical checks,
such as alarm checks and backflow preventers, should be flow
such as alarm checks and backflow preventers, should be flow
LF919-QT-FS
LF919-QT-FS
Series LF919-FS is equipped with an integrated flood sensor that,
Series LF919-FS is equipped with an integrated flood sensor that,
when activated, triggers notification of potential flood events from
when activated, triggers notification of potential flood events from
excessive relief valve discharges.
excessive relief valve discharges.
DRAFT
NOTICE
An add-on connection kit is required to activate the integrated
An add-on connection kit is required to activate the integrated
flood sensor. Without the connection kit, the flood sensor is a
flood sensor. Without the connection kit, the flood sensor is a
passive component that has no communication with any other
passive component that has no communication with any other
