Page 8
CONNECTIONS AND SETUP
1. If attaching a WattBox UPS battery pack to the power conditioner, connect an Ethernet cable between the
UPS Link
ports on
the power conditioner and the UPS.
2. For IP control and OvrC connectivity, connect a network cable from your router or switch into the WB-800
Network
port.
3. Connect the IEC power cord to the power conditioner and to the WattBox UPS (if applicable) or a grounded outlet.
CONTROLLED 1
CONTROLLED 2
CONTROLLED 3
CONTROLLED 4
CONTROLLED 5
CONTROLLED 6
NETWORK
RESET
120VAC 60Hz
POWER
SAFE
VOLTAGE
ACC
UPS LINK
OFF
ON
WB-800-IPVM-12
CONTROLLED 7
FI
LTE
R
E
D
CONTROLLED 8
CONTROLLED 9
CONTROLLED 10
CONTROLLED 11
CONTROLLED 12
Internet
Web Browser
Access
Mobile Apps
Router
WB-800-IPVM-12
Use OvrC Web and
smartphone apps to monitor
the WattBox remotely
OvrC Web Server