WattAge F-22 Raptor EP Instruction Manual Download Page 1

1

INSTRUCTIONS FOR FINAL ASSEMBLY

The Wattage F-22 Raptor EP is distributed exclusively by Global Hobby Distributors  18480 Bandilier Circle, Fountain Valley, CA  92728

All contents copyright © 2001, Global Hobby Distributors  Version V1.0  Feb. 2001

Thank you for choosing the Wattage F-22 Raptor EP for your next project.  The F-22 Raptor EP is

a stand-off scale electric-powered sport airplane built specifically to be flown in large parks or fields.
The full-scale F-22 Raptor, developed at Aeronautical Systems Center, Wright-Patterson Air Force
Base, Ohio, is the replacement for the F-15 Eagle air-superiority fighter.  It combines stealth design
with the supersonic, highly maneuverable, long-range requirements of an air-to-air fighter.

While the Wattage F-22 Raptor EP won't go supersonic, it is highly maneuverable and lightweight

for its size.  Features such as a one-piece molded foam fuselage, molded foam wing panels and
molded foam flying surfaces add up to make a lightweight yet durable airframe that is very easy to
repair in the event of a mishap.  And because it is lightweight, performance using the included 370
size motor and gear box is excellent.  The airplane is quite fast, yet is very stable throughout the
entire speed range, making it a perfect choice for both the experienced pilot and for those pilots just
graduating from their first sport airplane.

When you open the box, you will notice that you won't have much left to do or to purchase to

finish your new airplane.  In addition to the usual nuts and bolts, the F-22 Raptor EP includes a 370
size motor with gear box, a propeller, prebent wire pushrods, prebent stabilator tubes, clear canopy
and a colorful decal sheet.  The F-22 Raptor EP kit even includes optional landing gear and wheels
for those of you who want to be able to take off from the ground without hand-launching.

We hope you enjoy your new Wattage F-22 Raptor EP as much as we have enjoyed designing

and building it for you.  If you have any questions or comments, please feel free to contact us.  We
have also included a product survey in the back of this manual.  After you have finished assembling
the airplane, please take a moment to fill it out and send it to us.  We always enjoy hearing the
comments and suggestions that you have.

Summary of Contents for F-22 Raptor EP





























Reviews: