12.4 Connecting the pumphead to the fluid path for
the first time
With the pumphead installed, the next step is to connect to fluid path for the first time. This is a multi part
procedure which is provided in the following sections
l
Step 1: Check the seals in the pumphead ports
l
Step 2: Choose the connector type to be used
l
Step 3: Follow the procedure for the connector type
l
Step 4: Connect the pumphead safety overflow
If the pumphead has already been connected to the fluid path, follow the replacement connection procedure in
. The installation procedure depends on model: Follow the procedure for your
model.
12 INSTALLATION: PART 3 (FLUID PATH)
74
