Watlow PC1X-F20, User Manual

Page: 20 / 73

Navigating the Power Series
Choose a page (Setup or Factory) and press its key sequence. The page appears in the lower
display.
Press Î or Ó to find a specific menu in a page. The menu appears in the upper display and
the page remains in the lower display.
Press ® to enter the list of parameters in the menu displayed. The menu’s parameters
appear in the lower display and the values in the upper display. To go backward through the
parameter list press
¬ .
Press Î or Ó to select a value, either alpha or numeric, within a specific parameter.
***8
***8
***8
FCty
algo
SEt
• Setup Page:
From Display Loop, press
±
and
¬
keys together for 2 sec.
***8
***8
•
Factory Page:
From Setup Page, press
±
and
¬
and
®
keys together for 2 sec
***8
***8
-–-
load
• Display Loop:
From Setup or Factory Page, press the
±
key.
Setup Page - for
setting up the
control, alarms,
retransmit, and
communications.
Factory Page -
for calibration
and diagnostic
information.
Display Loop -
for monitoring
parameters and
adjusting manu-
al/digital input,
and for clearing
alarms if they are
latched.
4 . 2
■
Wa t l o w P o w e r S e r i e s N a v i g a t i o n a n d S o f t w a r e , C h a p t e r 4
NOTE:
The Load Activity Indicator in the Display Loop indicates different things, dependent on whether heater
diagnostics is installed. With heater diagnostics installed, it indicates load current has been detected.
Without heater diagnostics installed, it indicates the SCRs are being gated and line voltage is present.