Watkiss Vario, Operating Manual

Page: 55 / 110

51
also be positioned at the rear, in which case it must be
supported by the edge of the work bench.
The deflector lever at the front of the stacker base should
be pivoted upwards for delivery to the rear, and pivoted
downwards for delivery to the front.
Positioning the Stacker Tray at the Rear
Disconnect the earth connection at the back left of the
tray. Lift the inner edge of the tray firmly upwards to
release it from the mounting bar. Position the tray at the
rear, locating the clips over the mounting bar, and push
down firmly. Connect the earth connection at the back
left of the tray (viewed from the rear of the machine).
Delivery Direction Lever
Rear Delivery
Front Delivery
Rear Delivery Front Delivery