Watkiss Vario, Operating Manual

Page: 18 / 110

14
THE ‘BASIC’ WINDOW The
BASIC
window contains settings that regularly need
to be altered when setting up a new job.
SETS PER HOUR SETS PER HOUR
allows the production rate of the Vario
to be set. This is automatically limited according to the
machine configuration.
AUTO:
Selecting
AUTO
allows the Vario to run at its max-
imum production speed according to paper size, online
finishing equipment and the job setup.
SINGLE SET:
Normally there will be more than one set in
the conveyor at any one time. Touch
SINGLE SET
to allow
only one set in the conveyor at a time. This minimises the
correction required should an error occur. The sets per
hour will automatically adjust to achieve this.
AIR BLOW AIR BLOW
alters the amount of air available for sheet
separation in the feed bins. As a general rule, the heavier
and larger the sheet, the more air you need. The default
factory setting depends on the type of feed bins (25% for
friction, 40% for SlimVAC).
‘BASIC’ Window.