4 - Standard Tasks - Adjust the Stitch Pitch
Watkiss PowerSquare™224 User Manual
31
Adjust the Stitch Pitch
Introduction
The stitch pitch is the space between the stitches. The machine automatically
calculates the stitch pitch according to the size of the paper and the number of
stitches. The stitches are inserted symmetrically on the spine of the book.
If a non-standard stitch pitch is needed, use
STITCH PITCH
to make the adjust-
ment.
Limitations:
• The minimum stitch pitch ‘A’ is 25mm.
• The minimum distance from the centre of the stitch to the edge of the sheet
‘B’ is 15mm.
When to do
If you need the PowerSquare to insert the stitches in a non-standard position.
For example, to keep the stitches away from the text on the spine of the book.
Select a non-standard stitch pitch
1. Touch
BASIC
>
STITCHES
2. Touch
AUTO
. The
STITCH PITCH
value goes green.
3. Change the stitch pitch value.
Either use the ‘
+
’ and ‘
–
’ or touch the green stitch pitch value to open a
numeric keypad.
4. Touch
STITCHES
to close the window.
The stitch pitch value is displayed in the job mimic and on the
STITCHES
button.
Select a standard stitch pitch
1. Touch
BASIC
>
STITCHES
2. Touch
AUTO
to select
ON
.
3. Touch
STITCHES
to close the window.
The stitch pitch value is not displayed in the job mimic or on the
STITCHES
but-
ton.
A
A
A = Stitch Pitch
B
FIGURE 11. Stitch Pitch
Summary of Contents for PowerSquare 224
