Watkiss PowerSquare 224, User Manual

Page: 26 / 134

3 - The User Interface - The BASIC Window
22
Watkiss PowerSquare™224 User Manual
SIDE TRIM
The side-trim dimension is calculated automatically according
to the
PAGE SIZE
.
If needed, the side-trim dimension can be changed. Touch
SIDE TRIM
to adjust the size of the finished book.
The default setting is 2.5mm from each side.
The maximum side-trim is 40mm from each side.
The minimum side-trim is 1mm from each side.
The machine will not permit a setting that conflicts with the
stitch position. Change the stitch pitch if necessary.
The side-trim function can be turned off.
-
AUTO
Touch
AUTO
to select the default side-trim position.
-
TRIM SIZE Touch '
+
' or '
-
' to adjust the side-trim dimension.
-
TRIM OFFSET
By default, the book is trimmed equally on both sides. Touch
'
+
' or '
-
' to move the trim position away from the centre line.
The range is -40mm to +40mm, dependent on how much is to
be trimmed. The default setting is 0mm.
Button
Information