1 - Introduction to the Watkiss P2T 2-Knife Trimmer - Description of the Side-Trimmer
Watkiss P2T 2-Knife Trimmer User Manual
3
The Side-Trimmer
Component - Function Table
1
2
3
5
6
7
8
9
4
FIGURE 2. Side-Trimmer Components
No. Component
Function
1
The Top Cover
The top cover opens to allow error recovery.
2
The Trim Bin
The trim bin collects the paper that is trimmed
from the top and bottom of the book.
If the PowerSquare is configured with a Book
Stacker and a P2T Side-Trimmer, the P2T trim bin
is located in the Book Stacker.
3
The Stacker
The stacker collects the finished books.
4
Communications cable
The communications cable connects the Side-
Trimmer to the PowerSquare.
5
Voltage label
The voltage label displays the machine voltage.
6
Mains power input con-
nector
The mains power input connector is used to con-
nect the Side-Trimmer to mains electrical power.
7
Mains power ON/OFF
switch
The mains power ON/OFF switch turns ON the
Side-Trimmer or turns OFF the Side-Trimmer.