Watkiss Automation Plockmatic PowerSquare 224, Workbook

Page: 22 / 56

User Interface - Service Overview
18
Plockmatic PowerSquare™ 224 - Service Training Workbook
6. User Interface - Service Overview
Service functions on the User Interface require the service access code.
See Section 6.13 - “GUI Access Levels” in the PSQ Service Manual.
• Service access code
1973
.
The service functions on the User Interface provide
• counters for gate, stitch, form and trim cycles
• calibration, configuration settings and machine options
• machine status information including error reporting
• machine control functions
Refer to Section 6.11 (GUI Functions) and Section 6.20 (Diagnostic
Procedures) in the PSQ Service Manual.
Review the following functions:

6.11.3.2 (1st Stitch Offset)

6.11.7.3 (Endlay Axis Calibration)

6.11.8.2 (Bridge Axis Calibration)

6.11.9 (Service Options)

6.11.10 (Test)
7. Installation
Detailed instructions for installing the PSQ are included on the service support
CD.
• Watkiss PowerSquare™224 Unpacking and Installation Instructions, Right to
Left Versions

Locate the Unpacking and Installation Instructions
The PSQs used in the service training are already installed.
With the training instructor, review the following:

Check that the PSQ is level

Check the alignment of the Connecting Bridge to the printer

Check the alignment of the PSQ to the Connecting Bridge