P o w e r D e f e n d e r 1 4 0 f o r W a t e r w a y P o o l P u m p M o t o r
I n s t a l l a t i o n a n d O p e r a t i o n M a n u a l
19
Configure Your Pool Pump Motor
Begin programming the pool pump motor from the
Standard Settings
menu. The control compares the
time of day you enter against programmed schedule times to determine the next pump operation.
Time Of Day
Timers 1-7
(if all are activated) are keyed to this setting.
Press the
MENU/ENTER
button once to enter
Navigation Mode
. Press
Scroll Up
or
Scroll Down
to select the
Standard Settings
menu tree. Press
MENU/ENTER
to enter the menu tree. Press
MENU/ENTER
again to enter
Input Mode
. Press
Scroll Up
or
Scroll Down
to adjust the field
blinking in the LCD display. Press
MENU/ENTER
to cycle the edit field to the right. Press
Scroll Up
or
Scroll Down
to increase or decrease the hours, minutes, and adjust the AM/PM field. Press
MENU/ENTER
to save the changes. Press
START/PAUSE
to exit the menu option and return to the
menu tree in
Navigation Mode
. Press
START/PAUSE
again to return to normal operations.
24H or AM/PM
You can configure the pump to display time in a 24-hour clock format or 12-hour AM/PM format.
Press the
MENU/ENTER
button once to enter
Navigation Mode
. Press
Scroll Up
or
Scroll Down
to select the
Standard Settings
menu tree. Press
MENU/ENTER
to enter the menu tree. Press
Scroll Down
until you reach the 24H or AM/PM screen. Press
MENU/ENTER
again to enter
Input Mode
. Press
Scroll Up
or
Scroll Down
to toggle the selection. Press
MENU/ENTER
to
save the changes. Press
START/PAUSE
to exit the menu option and return to the menu tree in
Navigation Mode
. Press
START/PAUSE
again to return to normal operations.
Priming Duration
Pump priming functionality sets the duration time for the priming stage. The default time is three (3)
minutes. Priming Duration range is from 0 to 10 minutes. A setting of zero (0) disables priming.
Press the
MENU/ENTER
button once to enter
Navigation Mode
. Press
Scroll Up
or
Scroll Down
to select the
Standard Settings
menu tree. Press
MENU/ENTER
to enter the menu tree. Press
Scroll Down
until you reach the Priming Duration screen. Press
MENU/ENTER
again to enter
Input
Mode
. Press
Scroll Up
or
Scroll Down
to increases or decreases the duration minutes. Press
MENU/ENTER
to save the changes. Press
START/PAUSE
to exit the menu option and return to the
menu tree in
Navigation Mode
. Press
START/PAUSE
again to return to normal operations.
Priming Speed
Anytime the motor moves from a Standby state into a scheduled Timer, the control primes the pump
first by running at a designated speed for the duration indicated in the Priming Duration setting. By
default, the priming speed
is 2850 RPM.
Press the
MENU/ENTER
button once to enter
Navigation Mode
. Press
Scroll Up
or
Scroll Down
to select the
Standard Settings
menu tree. Press
MENU/ENTER
to enter the menu tree. Press
Scroll Down
until you reach the Priming Speed screen. Press
MENU/ENTER
again to enter
Input Mode
.