• Pool Light
- Press Right at AUX1.
- Press Up to select Pool Light.
- Press Right to selection screen.
- Press Up or Down to select brand of pool light.
- Press Right to cycle to AUX2.
• Spa Light
- Press Right at AUX2.
- Press Up two times (2x) to select Spa Light.
- Press Right to selection screen.
- Press Up or Down to select ‘On/Off’.
- Press Right to cycle to AUX3.
• Blower
- Press Right at AUX3.
- Press Down twenty-three times (23x) to select Blower.
- Press Right to selection screen.
- Press Down to select ‘Spa’.
- Press Right to cycle to AUX4.
• Cleaner
- Press Right at AUX4.
- Press Down nineteen times (19x) to select Cleaner.
- Press Right to selection screen.
- Press Down to select ‘Pool’.
- Press Right to cycle to AUX5.
3. ASSIGN OUTPUT:
• Filter Pump
- Press Right , and Up or Down to select the type of pump. For this guide,
select ‘1 Speed’.
• J1 Intake
- J1 Intake, J2 Return, J3 Solar, and J4 Option are designed to control the Actuator valves
that can be connected to J1, J2, J3, or J4 respectively on the board.
- With J1 Intake highlighted, press Right , then Up or Down to select the use for the actuator.
- NOTE: When J1 is set to ‘Intake’, J2 automatically sets to ‘Return’. This setting sets the OASIS for Pool/Spillover/Spa modes.
• AUX 1, 2, 3,…
- AUX 1 is for Relay 2 in most configurations. With AUX 1 highlighted, press Right , then Up or Down to choose
the device.
- Once a device has been chosen, pressing Right will move to a selection screen showing options for that type of device.
(Type of LIGHT that can be chosen; On/Off, IntelliBrite, Jandy Color, Jandy LED, Color Logic).
- Other devices can be assigned to: None, Pool, Spillover, or Spa mode. This will put the OASIS in that Mode when the device is
turned on.
- Pressing Right again will cycle down to the next AUX device. Or Left can be pressed to move to the
previous screen.
2
Blower
Blower