3
CLOCK / HOME
RIGHT / NEXT
LEFT / BACK
DISPLAYS & PROGRAMMING
SET CLOCK
Press CLOCK one time.
The hours will begin to flash.
Use or to adjust the hour. The hours will cycle through AM and PM.
Once the hour is set correctly, press one time to set the minutes.
Once you see the minutes flashing, use or to adjust the minutes.
Once time is set, press CLOCK.
SETTING HARDNESS
Enter the Installer Screens by pressing and holding
+
simultaneously for
3-5 seconds.
Once the display changes, if the system is programmed to calculate grains of hardness,
the first display in the installer screens will be “Water Hardness”.
Use or to increase or decrease the hardness level based on the customers raw
water total hardness.
Once the hardness level is set, you can advance to the next Installer Screen by pressing
OR you can return to the home display by pressing
