background image

Water Tech Industries (WTI) hereby warrants said equipment, 

only to the original purchaser at the original 

installation location.
THIS WARRANTY PERIOD BEGINS

 at the time of initial installation and use. The warranty becomes 

valid upon 

registration of the equipment.

GENERAL PARAMETERS —

 This warranty applies only to systems installed on 

USA OR CANADIAN residential, 

municipal (city water) water supplies 

that meet US Environmental Protection Agency MCL standards (or similar). 

5-YEAR WARRANTY ON CONTROL VALVE —

 Your water system has been equipped with the highest quality 

water conditioning control valves available. If, upon factory inspection, the control valve body or PC board is found to 
be defective, WaterTech Industries will furnish repair or replacement (at WTI option) of the control valve body and/or 
the PC board. All internal mechanical components are warranted from manufacturers defect for a 

period of five (5) 

years

 from the date of installation.

5-YEAR WARRANTY ON RESIN — 

The SOFTMAX PRO® has been equipped with high quality water treatment 

media (certified to NSF Standards). If, upon factory inspection within the warranty period, the resin is found to be 
defective, Water Tech Industries will furnish replacement resin. The resin warranty does not cover resins subjected to 
water containing greater than 2.0-ppm of free chlorine or chloramines or containing greater than 0.5-ppm total Iron 
and/or Manganese. Resin which has been fouled by iron, manganese, organics (or other contaminants not designed for 
treatment by the SOFTMAX PRO®) is not covered.

EXCLUSIONS AND LIMITATION OF LIABILITY—

 Water Tech Industries' liability for special, incidental, or 

consequential damages is expressly disclaimed. In no event shall Water Tech Industries' liability exceed the obligation of 
repairing or replacing any part that becomes defective under valid warranty coverage as described above. Cosmetic 
damage that does not affect the process functionality of the equipment is not covered. Water Tech Industries makes 
every effort to ensure that all illustrations and specifications are correct. However, these do not imply a warranty that 
the product is merchantable or fit for a particular purpose, or that the product may not vary from the illustrations and 
specifications.

The warranty contained herein is in lieu of all other warranties, expressed or inferred, including any implied warranty of 
fitness for a particular purpose. Labor and transportation costs incidental to the delivery or replacement of parts other 
than WTI factory repairs are not covered under this warranty. In the event of a warranty replacement or repair, WTI 

will cover the cost of shipping the covered components. This warranty expressly excludes any system which has been 
damaged by accident, fire, flood, Act of God, abuse, neglect, freezing, excessive temperature (below 40° F or above 
110° F.), inappropriate pressure (below 20 psi or above 100 psi), misuse, alteration of product in any way by owner or 
installing company, product identification tampering, misapplication, installation or operation not consistent with WTI 
instructions and installation outside of applicable plumbing codes and local regulations. Furthermore, this warranty 
expressly excludes any system which has been out of service for more than 90 days continuously. Fulfillment of the 
warranty coverage by WTI is contingent on proper execution of the procedures set forth in the WTI Warranty RGA 
policy. No person or representative is authorized to assume for Water Tech Industries any liability on its behalf, or in its 
name, except to refer the purchaser to this warranty. This warranty gives you specific legal rights, you may also have 
other rights which vary from state to state.

WHAT MUST YOU DO TO OBTAIN WARRANTY SERVICE — The warranty registration (via phone or 
website) must be completed within Ninety (90) days of installation to validate the Warranty. 

Repair 

work MUST be performed by an authorized Water Tech Dealer. In the event that authorized dealer service is not 
available, defective components may be returned directly to Water Tech Industries with prior approval for warranty 
service. The registered owner must contact Water Tech for return instructions and return the defective component, 
freight prepaid, with proof-of-purchase, within the applicable warranty period.

5/10 Year Warranty

WaterTech Industries Residential

Applicable to SOFTMAX PRO

®

 Models: SMX10, SMX12, SMX13

Summary of Contents for SOFTMAX PRO















Reviews: