-Various data (see below).
Designation
Line
Floor drying current setpoint .
-
Current drying day.
-
Terminated drying days.
-
State heat pump.
8006
State supplementary source.
8022
State DHW.
8003
State swimming pool.
8011
State heating circuit 1.
8000
State heating circuit 2.
8001
State cooling circuit 1.
8004
Outdoor temperature.
8700
Room temperature 1.
8740
Room setpoint 1.
Flow temperature 1.
8743
Flow temperature setpoint1.
Room temperature 2.
8770
Room setpoint 2.
Flow temperature 2.
8773
Flow temperature setpoint 2.
DHW (domestic hot water) temperature.
8830
Heat pump return temperature.
8410
Setpoint (return) HP.
Heat pump flow temperature.
8412
Setpoint (flow) HP.
Swimming pool temperature.
8900
Swimming pool temperature setpoint.
Minimum remaining stop time for compressor 1.
-
Minimum remaining running time for compressor 1.
-
3.9 Details
If the electrical power supply has been cut off while
the heat pump is operating (electrical power failure or
unprogrammed pressing of the on/off switch on the
hydraulic unit) the display will show error 370 when
the appliance restarts. Do not be concerned, the
communication between the outdoor and hydraulic unit
will re-establish itself in a few moments.
3.8 Information display
Various data can be displayed by pressing the info
button.
Depending on the type of unit, configuration and
operating state, some of the info lines listed below may
not appear.
-Possible error messages: The display shows the "Bell"
symbo
.
"
Consult your heating technician.
-Service messages ; Special mode messages:
The display shows the “Key” symbol
.
"
Consult your heating technician.
Operation manual "1534 - EN"
Air to Water Heat Pump
- 16 -
