RS1
WARNING
Lubricants
Do NOT use Vaseline, oils, hydrocarbon lubricants or spray silicone anywhere! Petroleum base lubricants will
cause swelling of o-rings and seals. The use of other lubricants may attack plastic Noryl®. It is recommended that
Dow Corning® silicone grease be used as a lubricant for all control valves. Dow Corning® 7 Release Compound
is used in the manufacture of Chandler Systems control valves. (Part # LT-150)
Sealants
Pipe dope and liquid thread sealers may contain a carrier that attacks some plastic materials. It is recommended
that Teflon® tape be used to seal plastic Noryl® threaded fittings.
Softener Specifications
3
General Specifications
CD24
CD24X*
CD32
CD32X*
Grains Capacity - Regeneration / Lbs Salt Used
20,250 / 7.5
27,000 / 9
Maximum Raw Water Hardness (grains)
50
75
Maximum Clear Iron / Manganese
3
5
Exchange Resin (cu ft per tank)
.75
1.0
Mineral Tanks (polyglass)
9 X 35
9 X 35
Brine Tank (polyethylene w grid & safety)
N/A
N/A
Service Flow Rate (gpm per active tank)*
10.0
11.0
Backwash Flow Rate (gpm)
2.0
2.0
Gallons Used / Regeneration
86
88
Space Required
23 X 14 X 45
23 X 14 X 45
Approximate Shipping Weight (lbs)
88
100
*Includes Legacy tablet and R-2014 Low Salt Sensor
