Safety and handling
March 14, 2014, 715004387 Rev. B
87
Safety and handling
Bear in mind the following safety considerations when performing
maintenance procedures:
for safety advisory information.
Warning:
To avoid personal contamination, always wear
chemical-resistant, powder-free gloves while handling instrument
components. The components can be contaminated with
biohazards or toxic materials.
Warning:
To prevent injury, always observe Good Laboratory
Practice when handling solvents, changing tubing, or operating
the instrument. Know the physical and chemical properties of the
solvents used (see the Material Safety Data Sheets for the solvents
in use).
Warning:
To avoid electric shock,
• do not remove the instrument’s panels. There are no
user-serviceable parts inside the instrument.
• ensure that the instrument is in Standby mode before
commencing any maintenance.
Warning:
To avoid burn injuries, take great care while working
with the probe and source; they can be hot.
Warning:
To avoid injury, ensure that these criteria are met when
performing maintenance inside the source enclosure:
• The instrument is in Standby mode.
• LC flow is diverted to waste or set to Off.
• Desolvation gas flow is stopped.
Summary of Contents for Xevo TQD
