Warning:
To avoid personal contamination with biologically hazardous, toxic, or corrosive
materials, you must understand the hazards associated with their handling.
Guidelines prescribing the proper use and handling of such materials appear in the latest edition
of the National Research Council's publication,
Prudent Practices in the Laboratory: Handling and
Management of Chemical Hazards
.
Observe Good Laboratory Practice (GLP) at all times, particularly when working with hazardous
materials, and consult the safety representative for your organization regarding its protocols for
handling such materials.
A.2 Notices
Notice advisories appear where an instrument, device, or component can be subject to use or
misuse that can damage it or compromise a sample’s integrity. The exclamation point symbol and
its associated statement alert you to such risk.
Notice:
To avoid damaging the case of the instrument or device, do not clean it with
abrasives or solvents.
A.3 Bottles Prohibited symbol
The Bottles Prohibited symbol alerts you to the risk of equipment damage caused by solvent
spills.
Prohibited:
To avoid equipment damage caused by spilled solvent, do not place
reservoir bottles directly atop an instrument or device or on its front ledge. Instead,
place the bottles in the bottle tray, which serves as secondary containment in the event
of spills.
A.4 Required protection
The Use Eye Protection and Wear Protective Gloves symbols alert you to the requirement for
personal protective equipment. Select appropriate protective equipment according to your
organization’s standard operating procedures.
Requirement:
Use eye protection when performing this procedure.
Requirement:
Wear clean, chemical-resistant, powder-free gloves when performing
this procedure.
August 20, 2021, 715005003 Ver. 04 (Previously released as Revision C)
Page 69
