Nebulizer temperature set point – Displays the set point for the nebulizer
temperature.
Nebulizer gas pressure set point – Displays the set point for the nebulizer gas
pressure, in kPa, bars, or psi. You specify pressure units in the console
software.
Current nebulizer gas pressure – Displays the current nebulizer gas pressure.
Photomultiplier tube gain factor – Displays the current photomultiplier-tube gain
factor.
Current sample energy – Displays the sample signal, in light scattering units.
Status – Displays the status of the current operation.
Drift tube temperature set point – Displays the set point for the drift tube
temperature.
Current drift tube temperature – Displays the current drift tube temperature.
You can access these additional functions by right-clicking anywhere in the detector
control panel:
Table 3–8: Additional functions in the 2424 ELS detector control panel
Control panel function
Description
Autozero
Resets the detector offsets.
Launch Console
Launches the console software.
Reset module
Resets the detector after an error condition.
Help
Displays the console online Help.
3.3.6 2475 FLR control panel
The 2475 Multi λ Fluorescence detector's control panel displays emission or energy
units, the excitation and emission wavelengths, and the photomultiplier tube gain
factor.
June 12, 2015, 715004747 Rev. A
Page 41