Power cord replacement hazard
Warning:
To avoid electric shock, use the SVT-type power cord in the
United States and HAR-type (or better) cord in Europe. The main power cord
must be replaced only with one of adequate rating. For information
regarding what cord to use in other countries, contact your local Waters
distributor.
Hand crush hazard
Warning:
To avoid hazards associated with the reciprocating or rotating
parts in the source, keep hands clear of the regions marked with yellow and
gray labels.
High voltage hazard
Warning:
To avoid electric shock, observe these precautions:
• Do not remove the mass spectrometer’s protective panels. The
components they cover are not user-serviceable.
• When the instrument is in Operate mode, avoid touching the areas
marked with the high voltage warning symbol. To touch external areas
marked with the symbol, first put the instrument in Standby mode.
Bottle placement prohibition
Prohibited:
To avoid injury from electrical shock or fire, and damage to the
equipment, do not place vessels containing liquid atop the workstation or ancillary
equipment or otherwise expose those units to dripping or splashing liquids.
Prohibited:
Do not place vessels containing liquid—such as solvent bottles
—atop the workstation or ancillary equipment or otherwise expose those
units to dripping or splashing liquids.
FCC radiation emissions notice
Changes or modifications not expressly approved by the party responsible for
compliance, could void the users authority to operate the equipment. This device
complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation.
June 12, 2015, 715004747 Rev. A
Page iv