Waters 2489, Operator'S Manual

Page: 109 / 234

Using the operator interface 3-41
Storing a method, method number field
3. Enter a number from 1 to 5 and press Enter. A brief message (“Storing *
as method n”) appears.
4. When the display returns to the Method choice list, the method number
you selected appears within the method icon. That method remains
active until you retrieve another method or reset the detector to default
conditions (Method *).
Retrieving a method
To retrieve a previously stored method:
1. Return to the Method choice list by pressing METHOD (Shift A/B).
2. Press 3, Retrieve a method. The last method number stored or retrieved
appears in the method number slot box.
3. Enter the number of the method you want to retrieve and press Enter. A
brief message (“Retrieving method n”) appears.
When the display returns to the Method choice list, the method number
you specified appears within the method number icon (see the table on
page 3-4 ).
Caution: There is no warning message if the method number you select
is already being used by a previously stored method. When you enter a
number and press Enter, the current method conditions are stored,
overwriting any previous method stored in the same slot.