Waters 2475, Operator'S Manual, Page: 130 / 228

3-58 Using the Detector
Parameters used for sample and zero-scans
The following table provides the defaults and ranges for all parameters for the
sample and zero-scans.
Sample and zero-scan parameters
Parameter Screen Units
Range or
default
Type 1 n/a Sample scan: 1
Zero-scan: 2
Default: 1
λ
range 2 nm Range: 200 to
900 nm
Default: 200 or
210 nm
Pace 3 nm/min Range: 30 to
1000 nm/min
Default: 100
nm/min
EUFS 3 EU Range: 1 to
100,000
Default: Last
number entered
Tick mark
(Mark each nm)
4 nm Range: 10 to
100
Default: Last
number entered
Gain 2 n/a Range: 1 to
1,000
λ
other 2 nm Default: 200 or
210 nm
Monochromator
scan type
2 n/a Excitation or
emission