WATERS CORPORATION 2424, Operator'S Manual, Page: 77 / 196

Navigating the user interface 3-13
Navigating the user interface
When operating the detector:
1. Press Enter or and to navigate among editable fields. A heavy
border appears around the active field after you complete an entry.
2. Press Enter to advance to the next active field.
3. If you make an error, press CE (Clear Entry) to undo any changes and
return to the active entry field.
4. An active field containing a choice list has a number to the right of the
field within the thick border. To display a choice list, press Enter, and
then take one of these actions:
•
Press the corresponding number key to select an item immediately.
• Use and to scroll through the list, and then press Enter.
Tips:
• If you know the number corresponding to the desired choice, you can
press that number without pressing Enter first.
• The and keys do not increase or decrease numeric fields. To change
field entries, use the numeric keypad.
Navigating to and from the Home screen
Pressing HOME brings you to the Home screen from most screens. From the
Home screen, you can access the following secondary functions by pressing
Next:
• Data rate and filter time constant
• Enable/disable auxiliary switch output
• LSU offset (data offset)
• Maximum voltage output
• Voltage offset
• Enable/disable and select the auto zero function
Tip:
The parameters you enter into the secondary function fields become part
of the current method conditions and are stored when you store the method.
See also:
“Programming methods and events” on page 3-34 .