WATERS CORPORATION 2424, Operator'S Manual, Page: 38 / 196

2-8 Setting up the Detector
2. Insert the tubing into the fitting until it bottoms.
Inserting the gas supply tube
3. Pull the tubing to check engagement of the grab ring.
4. Two pieces of tubing are provided in the startup kit. If you are using the
system with an external filter, first connect the gas source to the filter,
and then connect the filter to the back of the unit.
Venting the exhaust hose
To properly vent the exhaust vapor to waste, a vapor trap exhaust bottle is
provided (startup kit). The vessel traps condensates that form from vented
vapor exiting the detector.
Gas supply tubing
Fitting