WATERS CORPORATION 2424, Operator'S Manual, Page: 104 / 196

3-40 Operating the Detector
To reset one or more methods
1. Press METHOD. The Method choice list appears.
2. Press 5 Reset method *. A message screen appears.
Reset method message
3. If you press Enter
• all timed events are deleted.
• all threshold events are disabled.
• all other operating parameters of the method (LSU-FS, etc.) are set
to defaults.
If you press Cancel (press Shift, 0), the Method choice list appears.
Tip:
To prevent losing the current conditions before you clear the
method, store them in one of the available storage slots. When you clear
the storage slots, you can restore the previous conditions.
4. Press 4 Store method, and enter a storage location number.
5. To clear other stored methods, repeat step 4.
6. When you return to the Home screen by pressing HOME, the method
number icon displays an asterisk.
Clearing events
You may want to clear only timed and threshold events without resetting any
other operating parameters.
To clear active events
1. Return to the Method choice list by pressing METHOD.