WATERS CORPORATION 2424, Operator'S Manual, Page: 100 / 196

3-36 Operating the Detector
To program a new timed event
1. Press METHOD (press Shift, TEMP
°
C). The Method choice list appears.
Method choice list
2. Press 1 Timed events. An active field for entering the time of the event
appears.
3. Enter the time for the event. When you begin entering the time,
additional fields appear.
Timed events screen
4. Press Enter to enter the time. To advance to the “set” field (Events
choice list), press .
5. Press Enter again to display the choice list, or, if you know the event
number, press the number for the event you are programming.
6. Enter the appropriate selection in the “to” field, if the field appears.
7. Press Next to advance to a new timed event.
8. To delete a timed event, press CE when the time field is active to change
it to Off.
9. Press HOME to return to the Home screen, and then press Run/Stop to
start the method.
10. Press Reset (press Shift, Run/Stop) to reset the run clock to 0.